Asset Remote is an add on accessory to your LIMS or
ITAM. It has the following advantages:
It acts as a mobile switch:

Mobile Switch is a device which will be helpful to switch
on
and off any electrical/electronic devices through a SMS. The
parameters of these devices can be monitored remotely and
will also be able to set the limit for alerts.
LIVE DEMO AVAILABLE AT LAB AUTOMATION. SEE US CONTROL A ROBOT
REMOTELY and WEB CAST IT all from your "Handy" or
mobile phone!
Features:
- 14 Analogue input lines
- Numbers for receiving alerts are configurable
- Individual threshold limit with each line
- Limits could be configured remotely
- Regular interval monitoring
- 16 digital I/O lines to monitor
- Multiple message for fault
How it works ?
- Interface the analog or digital signal with input lines
(for monitoring)
or output lines (for controlling and monitoring)
- Attach GSM modem with an active SIM card to Mobile Switch
- Configure the mobile access list from PC interface
- Configure the alert message and threshold limit for automatic
alerts for different lines
- User can send SMS to mobile SIM card attached to Mobile
Switch
- Mobile Switch sends alerts if threshold limit is crossed
and responds
to control or monitoring request for allowed mobile numbers

BENEFITS:
- Remote access to the devices placed at various detection
areas
- Remote monitoring of parameters like RPM, voltage, heat,
temperature, etc
- Get alerted in case of any parameters get changed based
on defined threshold limits
- Change the parameter remotely
- Periodl update of parameter values
- Store the parameters for analysis
- Economic way to monitor devices at remote locations
APPLICATIONS:
- Security
- Disaster Management
- Remote control and monitoring devices at works
- Laboratory process alerts and equipment failure
- Street Lights on/off on set timings
- Open emergency exit through SMS in case of fire
- Vehicle theft
Applicable Areas for Security:
There are numerous applications of mobile switch in this
area for e.g a gate can be closed or opened in case of emergency
by sending an SMS, or an alarm can be switched on in case
of tress passing.
Applicable Areas for Disaster Management and Planning:
Any device set to predict natural calamities can be monitored
through the device and an alert message can be sent to concerned
authorities on varying the set parameters.

Applicable Areas for device control such as community
street lights:
The device can also be useful to perform some regular tasks
from remote location as in the case of streetlights it can
be set that at particular time the certain switching points
should be turned on or off.
|